Fema K Series, User Manual, Page: 9 / 28

FEMA ELECTRÓNICA . Series K . K40-C1
9
1.19 Configuration menu (cont.)
Configuration menu for mode ‘ counter quadrature ’ (‘ cnq.2 ’). to-
tal impulses received are multiplied by the value of the ‘multiplier’
(‘
MuLt ’) register and divided by the ‘divider’ (‘ dIV ’) register. result is
refreshed on the display.
• assign the value for parameter ‘ Multiplier ’ (‘ MuLt ’) from 1 to 9999.
• assign the value for parameter ‘ Divider ’ (‘ dIV ’) from 1 to 9999.
• assign the value for ‘ Preset ’ (‘ PrSt ’) from -1999 to 9999. Reset acti-
vation loads on display the preset value.
• select the ‘ edges’ to count for each quadrature cycle (‘ q.124 ’). Se-
lect ‘ 1--1 ’ for 1 impulse per quadrature cycle. Select ‘ 1--2 ’ for 2 im-
pulses per quadrature cycle. Select ‘ 1--4 ’ for 4 impulses per quadra-
ture cycle.
1.19.3 Configuration for ‘cnq.2’
Configuration menu for mode ‘ c inhibition control ’ (‘ cnI.3 ’).
Total impulses received are multiplied by the value of the ‘multiplier’
(‘
MuLt ’) register and divided by the ‘divider’ (‘ dIV ’) register. result is
refreshed on the display.
• assign the value for parameter ‘ Multiplier ’ (‘ MuLt ’) from 1 to 9999.
• assign the value for parameter ‘ Divider ’ (‘ dIV ’) from 1 to 9999.
• assign the value for ‘ Preset ’ (‘ PrSt ’) from -1999 to 9999. Reset acti-
vation loads on display the preset value.
• select the counting mode (‘ ModE ’) to ‘ uP ’ for upwards counting
(impulses received add) or ‘ doWn ’ for downwards counting (impuls-
es received substract).
• select the activation mode for the ‘ inhibition ’ (‘ Inh ’) control. Select
‘ on_h ’ to inhibit the counting when channel B is at logical state ‘1’.
Select ‘ on_0 ’ to inhibit the counting when channel B is at logical state
‘0’.
1.19.4 Configuration for ‘cnI.3’
Configuration menu for mode ‘ c control add / substract ’
(‘ cnc.4 ’). Total impulses received are multiplied by the value of the
‘multiplier’ (‘ MuLt ’) register and divided by the ‘divider’ (‘ dIV ’) regis-
ter. Result is refreshed on the display.
• assign the value for parameter ‘ Multiplier ’ (‘ MuLt ’) from 1 to 9999.
• assign the value for parameter ‘ Divider ’ (‘ dIV ’) from 1 to 9999.
• assign the value for ‘ Preset ’ (‘ PrSt ’) from -1999 to 9999. Reset acti-
vation loads on display the preset value.
• select the activation mode for the ‘ control add / substract ’ (‘ Add ’).
Select ‘ on_h ’ activates the addition of impulses received on chan-
nel A when channel B is at logical state ‘1’ (impulses on channel A
substract if channel B is at logical state ‘0’). Select ‘
on_0 ’ activates
the addition of impulses received on channel A when channel B is
at logical state ‘0’ (impulses on channel A substract if channel B is at
logical state ‘1’).
1.19.5 Configuration for ‘cnc.4’
Multiplier
1 to 9999
Divider
1 to 9999
Conf. counter
+ inhibition
Multiplier
Divider
Preset
Valor del preset
-1999 to 9999
Mode
Up
Down
Inhibition
Inhibits if chan-
nel B is high
Inhibits if chan-
nel B is 0 Vdc
Conf. counter
quadrature
Multiplier
1 to 9999
Divider
1 to 9999
Multiplier
Divider
Preset
Valor del preset
-1999 to 9999
Edges
1 imp. per cycle
2 imp. per cycle
4 imp. per cycle
Multiplier
1 to 9999
Divider
1 to 9999
Configuration
c control
add / substract
Multiplier
Divider
Preset
Valor del preset
-1999 to 9999
Control A/S
Adds if channel
B is high
Adds if channel
B is 0 Vdc