FEMA ELECTRÓNICA . Series K . K40-C1
2
1. Panel meter K40-C1
Counter, ratemeter and periodmeter, 96
x
48
mm (1/8 DIN), with 20 mm digit height
Panel meter 96 x 48 mm (1/8 DIN) and 4 digits with 20 mm digit
height, configurable with 5 impulse counter modes (see section 1.2),
2 ratemeter modes (see section 1.3) and a 1 periodmeter mode
section 1.4).
Highly configurable, accepts all types of sensors (NPN, PNP, push-
pull, Namur, inductive, pick-up, mechanical, TTL, CMOS, ...) including
quadrature signals (single and bidirectional encoder signals).
Reading from 9999 to -1999 with decimal point, scalable reading
with configurable multiplier factor (1 to 9999) and configurable di-
vider factor (1 to 9999). Includes internal pull-up and pull-down re-
sistors, configurable trigger levels, detection by rising or falling edge,
excitation voltage configurable from 5 Vdc to 18 Vdc.
Options for output and control with 1, 2 and 3 relays, isolated analog
outputs, communications in Modbus RTU, RS-485 ASCII and RS-232.
Special options with 4 and 6 relay outputs.
Independent alarms configurable as maximum or minimum, with 1
or 2 setpoints per alarm, hysteresis, independent activation and de-
activation delays and control for inverted relay.
Front protection IP54 with optional IP65. Connections by plug-in
screw terminals. For industrial applications.
• ‘
Fast access
’ menu to selected functions, accessible with key UP (
5
)
(see section 1.19.12)
• Function ‘
On power up
’ for system protection on first ‘cold’ start-
up or automatic reset (see section 1.19.14)
• Special ‘
FAST
’ mode for fast counting applications (see section 1.16)
• Special ‘
SLOW
’ mode for slow ratemeter applications (low frequen-
cy applications) (see section 1.15)
• Direct configuration for most usual sensor, at the ‘
SnSr / Auto
’
menu (see section 1.19.10)
• Function ‘
Trigger Sense
’ helps to detect the correct trigger level
(see section 1.13)
Multiple display filters, memory for maximum and minimum reading,
password protection, 5 brightness levels.
Index
1. Panel meter K40-C1 . . . . . . . . . . . . . . . . . . . . . . 2
1.1 How to order . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Impulse counter modes . . . . . . . . . . . . . . . . . . 3
1.3 ratemeter modes. . . . . . . . . . . . . . . . . . . . . . 3
1.4 Periodmeter mode . . . . . . . . . . . . . . . . . . . . . 3
1.5 Functions included . . . . . . . . . . . . . . . . . . . . . 3
1.6 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.7 Power connections . . . . . . . . . . . . . . . . . . . . . 4
1.8 Sensor configuration and connections . . . . . . . . . . 4
1.9 Vista posterior . . . . . . . . . . . . . . . . . . . . . . . 4
1.10 Signal connections . . . . . . . . . . . . . . . . . . . . 4
1.11 Technical specifications . . . . . . . . . . . . . . . . . . 5
1.12 mechanical dimensions (mm) . . . . . . . . . . . . . . 5
1.13 Function ‘Trigger Sense’ . . . . . . . . . . . . . . . . . 6
1.14 Function ‘cycle counter . . . . . . . . . . . . . . . . . . 6
1.15 ‘SLOW’ mode . . . . . . . . . . . . . . . . . . . . . . . 6
1.16 ‘FAST’ mode . . . . . . . . . . . . . . . . . . . . . . . . 6
1.17 How to operate the menus. . . . . . . . . . . . . . . . 7
1.18 messages and errors . . . . . . . . . . . . . . . . . . . 7
1.19 Configuration menu. . . . . . . . . . . . . . . . . . . . 8
1.19.1 Initial set-up . . . . . . . . . . . . . . . . . . . . . . 8
1.19.2 Configuration for ‘cn.1’ . . . . . . . . . . . . . . . . 8
1.19.3 Configuration for ‘cnq.2’ . . . . . . . . . . . . . . . 9
1.19.4 Configuration for ‘cnI.3’ . . . . . . . . . . . . . . . . 9
1.19.5 Configuration for ‘cnc.4’ . . . . . . . . . . . . . . . 9
1.19.6 Configuration for ‘cnd.5’ . . . . . . . . . . . . . . . 10
1.19.7 Configuration for ‘rt.6’ . . . . . . . . . . . . . . . . 10
1.19.8 Configuration for ‘rtq.7’. . . . . . . . . . . . . . . . 10
1.19.9 Configuration for ‘Prd.8’ . . . . . . . . . . . . . . . 11
1.19.10 Sensor configuration. . . . . . . . . . . . . . . . . 11
1.19.11 Alarms . . . . . . . . . . . . . . . . . . . . . . . . 13
1.19.12 Fast access . . . . . . . . . . . . . . . . . . . . . .14
1.19.13 Super fast access . . . . . . . . . . . . . . . . . . . 14
1.19.14 Menu ‘On Power Up’ . . . . . . . . . . . . . . . . 14
1.19.15 Menu ‘Key LE’ . . . . . . . . . . . . . . . . . . . . 15
1.19.16 Menus ‘Overrange / underrange’. . . . . . . . . . 15
1.19.17 Left zeros . . . . . . . . . . . . . . . . . . . . . . . 15
1.19.18 Function ‘Password’ . . . . . . . . . . . . . . . . . 15
1.19.19 Factory reset . . . . . . . . . . . . . . . . . . . . . 15
1.19.20 Firmware version. . . . . . . . . . . . . . . . . . . 15
1.19.21 Brightness . . . . . . . . . . . . . . . . . . . . . . 15
1.19.22 Access to optional modules . . . . . . . . . . . . . 15
1.20 Full configuration menu . . . . . . . . . . . . . . . . . 16
1.21 Factory configuration . . . . . . . . . . . . . . . . . . . 19
1.22 to access the instrument . . . . . . . . . . . . . . . . . 20
1.23 modular system . . . . . . . . . . . . . . . . . . . . . . 20
1.24 Precautions on installation . . . . . . . . . . . . . . . . 21
1.25 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . .21
1.26 CE declaration of conformity . . . . . . . . . . . . . . . 21
2. Output and control modules . . . . . . . . . . . . . . . . . 22
2.1 module r1. . . . . . . . . . . . . . . . . . . . . . . . . .22
2.2 Module AO . . . . . . . . . . . . . . . . . . . . . . . . .22
2.3 Module RTU. . . . . . . . . . . . . . . . . . . . . . . . .23
2.4 module S4. . . . . . . . . . . . . . . . . . . . . . . . . .23
2.5 module S2. . . . . . . . . . . . . . . . . . . . . . . . . .24
2.6 modules r2, r4, r6. . . . . . . . . . . . . . . . . . . . . 24
3. Other options . . . . . . . . . . . . . . . . . . . . . . . . . .26
4. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 27