Fema K Series, User Manual, Page: 19 / 28

FEMA ELECTRÓNICA . Series K . K40-C1
19
Option 1
Configuration menu for the module installed at Opt.1
Option 2
Configuration menu for the module installed at Opt.2
Option 3
Configuration menu for the module installed at Opt.3
Password
Version
Factory reset
Minimum
Brightness
Maximum
Standard
Left zeros
With left zeros
Without left zeros
Function counter (‘cn.1’)
Decimal point no
Counter configuration
Multiplier
x1
Divider /1
Preset 0
mode up
‘FAST’ off
Sensor
Pulls on channel A
no pull resistor
Pulls on channel B no pull resistor
Pulls on reset pull-up
Trigger 2,5 Vdc
Activation for channel A on rising edge (‘on_h’)
Excitation voltage
5 Vdc
Antirrebound filter 0 mSeconds
tools
Fast access (Key UP)
off
‘On Power Up’
Delay
0 seconds
Key ‘LE’ reset function
Memory of maximum -1999
Memory of minimum 9999
Memory of cycles 0
Counter overrange flash
Counter underrange flash
Left zeros off
Password off
Brightness 3
Alarms 1,2 and 3
Active
off (disabled)
type maximum
Setpoint 1000
Hysteresis 0 counts
Activation delay 0.0 seconds
Deactivation delay 0.0 seconds
Setpoint 2 off
On Alarm continue
Inverted relay off
Locked alarms off
Factory configuration for Ratemeter (‘cnF.6) and periodmeter (‘cnF.8)
modes.
Multiplier x1
Divider /1
time windows 0.5
‘SLOW’ mode off
Recursive filter off
1.20 Full configuration menu (cont.) 1.21 Factory configuration