Fellowes Standard Horizon SRN-9x, Service Manual

Page: 47 / 67

N U M B E R E R
PAGE 45
M A N UAL
Section 13 GUARDS
13.2 .... Stripper
The guard at the feed end supports the stripper plate which has
been designed to minimize the risk of damaged stock wrapping
around the input rollers.
It is important that the stripper is correctly adjusted and this can
be achieved by releasing its three fixing screws to obtain a
clearance of 0.75mm or 0.030" between the edge of the stripper
and the upper input roller.
Note ....... It is important to check this with the guard closed.
WARNING
DO NOT OPEN THE GUARDS WHILST THE MACHINE IS
RUNNING, AS YOU COULD INADVERTENTLY FORCE
THE STRIPPER INTO THE ROLLER BEFORE THE SAFETY
SWITCH HAS STOPPED THE MACHINE
Stripper.................................................................... Fig 13.21
0,75mm / 0.030”
Friction Machine
Front Guard
Input Stripper
Upper Input
Roller
Lower Input
Roller
0,75mm / 0.030”
Suction Machine
Entry Guard
Input Stripper
Upper Input
Roller
Lower Input
Roller