Fellowes Standard Horizon SRN-9x, Service Manual

Page: 4 / 67

R OTA R Y
PAGE 2
S E R V I C E
i
.......... Introduction
The purpose of this Manual is to explain the procedure for dis-
mantling and re-assembly of the major assemblies on both the
Friction-Feed and Suction Feed Rotary Numbering Machines.
All the engineering adjustments are shown at the end of each
relevant section.
Operator's adjustments and routine maintenance are explained in
the appropriate Operators Guide which should always be used in
conjunction with this manual.
It is always a good idea to have a copy of the machines Illustrated
Parts Manual available when servicing, as its illustrations provide
an invaluable reference to the construction of the individual
assemblies used to build the machine.
ii
......... Fasteners
Most of the pulleys on the machines use dog-point screws, which
engage in holes in the shafts to ensure reliable drive. They must be
fully withdrawn prior to dismantling.
All threaded fasteners are ISO-Metric & all nuts are ISO-Metric
Hexagon. All screws are hardened high tensile steel.
SERVICE MANUAL
INTRODUCTION
ROTARY NUMBERING MACHINES