background image

fellowes.com

1789 Norwood Avenue, Itasca, Illinois 60143-1095  •  USA  • 630-893-1600 

fellowes.com

1789 Norwood Avenue, Itasca, Illinois 60143-1095  •  USA  • 630-893-1600 

FCC CLASS B NOTICE
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there 

is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 

measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CANADA CLASS B NOTICE - AVIS CANADA, CLASSE B
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
MODIFICATIONS
Any modifications made to this device that are not approved by Fellowes may void the authority granted to the user by the FCC and/or by Industry Canada to 

operate this equipment.
Toutes modifications apportées à ce dispositif et non approuvées par Fellowes annuleront le droit accordé à l’utilisateur par le FCC et/ou par Industrie Canada 

de faire fonctionner cet équipement.

Help Line

 

Canada 

+ 1-800-665-4339

México +001-800-514-9057

United States 

+ 1-800-955-0959

©2014 Fellowes, Inc. Part No. 407944

Summary of Contents for SATURN 3i 125












Reviews: