33
35 34
36
11
30 29 28 27 26
9
8
33 32 31
10
34
30
33 32 31
10
Nr. 10
!
&
$
"
#
!
!
%
"
Multi Boring Machine
FD 21 professional
Fig. 7-7: Option: quick adjustment
7.8 Depth stop (with horizontal drill)
Fix the workpiece against the lower stop.
7.7 Lateral stops
Note:
every marked mortising position on the scale corresponds to its mortising centre.
Fig. 7-6: Lateral stops
Fig. 7-8: Depth stop (Horizontal drilling)
!
Depth stop
Making adjustments and preparations
1.
Switch off the machine.
2.
Loosen the thumb screws from the locking.
3.
Open cam lever and move fence.
4.
Side measurement: is read from the magnifying lens
5.
Tighten side stop single-hand clamp lever.
!
Single-hand clamping lever
"
Thumb screw
#
Scale / Lens
Option: quick adjustment
Preparations:
1.
Loosen the clamping screw.
2.
Lock pins: Move to the desired position
3.
Tighten the clamping screw.
4.
Fine adjustment: Correct the misadjustment with the
setting screw
Calibrate the fence:
5.
Loosen the thumb screws from the locking.
6.
Open cam lever and move fence.
• Push to the front over the fence
• Push in thumb screw 2.
• Push to the left until it stops/until it reached the
fence...
7.
Tighten side stop single-hand clamp lever.
$
Clamping screw
%
Lock pins
&
Adjusting screw
