28
!
"
#
$
!
"
#
Multi Boring Machine
FD 21 professional
Quick-change chucks
(Order no. 15.0.310)
Supplied with 5 standard pieces
mitre fence / Middle strip
(Order no. 432-311)
Adjustment gauge
(Order no. 432-317)
Lateral stops digital
(Order no. 432-315)
!
mitre fence
"
Middle strip
#
Adjustment gauge
$
Lateral stop digital
Note: Further information
See chapter entitled >Making adjustments and preparations< and
>Operation<
See assembly instructions
Assembly
6.4 Accessories
Additional pneumatic clamp
(Order no. 432-310).
Assembly:
• Disconnect the machine from the mains power supply
• Remove the machine from the compressed air supply
system and vent the remaining compressed air.
• Compressed air supply connection: remove left clamp
• Mount standard T piece
• Pneumatic hose mount connector
• Workpiece clamp: fix on the cross bar
• Pneumatic hose mount new clamp
Fig. 6-7: Additional pneumatic clamp
Fig. 6-4: Quick-change chucks
Fig. 6-5: mitre fence / Middle strip
Fig. 6-6: Lateral stops digital
6.4.1 Additional pneumatic clamp
!
T-Piece
"
Pneumatic clamp frame
#
Workpiece clamp
