Fein KBM 50 Q Manual Download Page 29 | Manualshive

Page: 29 / 233

Fein KBM 50 Q Manual Download Page 29

29

en

en

Original Instructions.

Symbols, abbreviations and terms used.

Symbol, character

Explanation

Make sure to read the enclosed documents such as the Instruction Manual
and the General Safety Instructions.
Observe the instructions in the text or graphic opposite!

Observe the instructions in the text or graphic opposite!

Before commencing this work step, pull the mains plug out of the socket.
Otherwise there will be danger of injury if the power tool should start
unintentionally.
Use eye protection during operation.

Use ear protection during operation.

Do not touch the rotating parts of the power tool.

Warning against sharp edges of application tools, such as the cutting edges
of the cutter blades.

Danger of slipping!

Danger of crushes or contusions!

Caution! Falling objects!

Hot surface!

Risk of tipping over!

Fasten strap!

Do not reach in!

General prohibition sign. This action is prohibited.

Confirms the conformity of the power tool with the directives of the
European Community.
This sign indicates a possible dangerous situation that could cause severe or
fatal injury.
Worn out power tools and other electrotechnical and electrical products
should be sorted separately for environmental-friendly recycling.
1st gear/2nd gear

Tap

Steel

WARNING

OBJ_BUCH-0000000352-001.book Page 29 Tuesday, June 11, 2019 2:19 PM

«
...
27
28
29
30
31
...
»

Summary of Contents for KBM 50 Q










































































































































































































































Reviews:

No comments