OBID
®
System-Manual
ID RW40.30-USB
FEIG ELECTRONIC GmbH
Page 9 of 57
H80701-2e-ID-B.doc
2. Data Transmission between OBID
®
ID RW-Reader and Host
2.1. Configuration Mode
This data transmission mode is intended for reader configuration and reader diagnosis. The reader-
configuration parameters will be stored in an EEPROM and are stored also after a power failure.
All commands of the configuration mode that cause an automatic reset, are marked by the sign
.
Host (Terminal / PC / ....)
Reader
Parameter- / control command
→
Parameter
received and stored
yes
no
←
OK status
Not OK status
←
Notes:
•
After storing a configuration parameter in the internal EEPROM, the reader automatically
executes a reset in order to take over the new configuration. An eventually selected
transponder thus is deselected. These commands are marked by the sign "
9
".
•
After receiving the receipt a waiting time of 50 ms has to be kept.
