OBID i-
scan
®
Installation
ID ISC.ANT1700/740-A /-B
FEIG ELECTRONIC GmbH
Page 51 of 74
M91201-5e-ID-B.doc
11.
2. Connect RS485 cable to X3
of reader.
12.
Plug 5 pin connection plug
onto X13/GPC-OUT of
Terminal Board.
13.
Installing the People
Counter at antennas
Type B
The installation must be
done in the same way like
at the antenna Type A. Only
the RS485 cable will not be
connected. This cable has
to be tied together to small
loops with the cable tie..
14.
After the installation you
have to stick the adhesive
label of the GPC below of
the type plate of the
antenna
