OBID i-
scan
®
Installation
ID ISC.ANT1700/740-A /-B
FEIG ELECTRONIC GmbH
Page 26 of 74
M91201-5e-ID-B.doc
Note:
A reverse polarity could damage the device or the In-/Outputs.
The coax cables have fixed lengths and may not be shortened and therefore need to be tied into
small loops (see Fig. 15). Tie all cables as far away from the antenna conductor as possible. The
cables must never be allowed to contact the antenna conductor. The cable from antenna type B to
the antenna type A should preferably be connected shortly. Unused cable lengths are possible
should be tied in antenna B type.
Fig. 15:Connection of the components in an antenna Type A
Fig. 16:Tie together the cables in an antenna Type B
