MWD BPC-H / MWD BPC-HU
List of the service parameters
EN
FEIG ELECTRONIC GmbH
45/74
MWD_BPC-H-HU_ver4_Manual_rev0_mul
P.
[Unit]
Range
Function
Description/ Note
L.625
L.725
L.825
L.925
0 ... 3
Object tracking
A detected object can be tracked by the motion detector
even if it is moving very slowly. The sensitivity is specified
with this parameter.
0:
off
1:
low
2:
medium
3:
high
If this function is activated, small movements such as
leaves, rain or snow can cause continuous activation.
7.1.2
Motion detector, channel 2
Table 9: Motion detector, channel 2
P.
[Unit]
Range
Function
Description/ Note
L.62B
L.72B
L.82B
L.92B
1 ... F
Sensitivity
This parameter defines the sensitivity for the channel to be
parameterized.
1: low … F: high
L.62C
L.72C
L.82C
L.92C
0 ... 2
Direction detection
This parameter specifies wether the motion detector reacts
to approaching or departing objects.
0:
deactivated
1:
approaching
2:
departing
If the vehicle or human filter is activated, only
directional detection direction is permitted. Changes to
the setting "detection direction" will be blocked.
L.62D
L.72D
L.82D
L.92D
0 ... 6
Human filter
This parameter specifies the probability with which
exclusively persons and not vehicles are detected.
0:
deactivated
1:
low (persons and vehicles)
....
4:
medium
....
6:
high (only certainly detected humans)
Because there are many different objects with complex
movings detected, there can appear in some cases
dysfunctions in the human filter.
The human filter can only be activated if the
approaching detection direction has been set.
