EN
List of the service parameters
MWD BPC-H / MWD BPC-HU
FEIG ELECTRONIC GmbH
42/74
MWD_BPC-H-HU_ver4_Manual_rev0_mul
7
List of the service parameters
When starting parameter mode, the channel to be edited or parameterized must first be selected (see Table 5
on page 40). For editing the convenience profiles see also Table 6 on page 41.
No channel needs to be selected for reading the serial number and setting the comfort profiles.
7.1 Motion detector
Table 7: Motion detector parameters
P.
[Unit]
Range
Function
Description/ Note
L.600
L.700
L.800
L.900
0 ... 4
Activation Motion
detector
This parameter is used to activate motion detector.
3:
MWD BPC
L.601
L.701
L.801
L.901
MWD BPC Motion
detector Assignment
This parameter explicitly assigns a serial number of a
connected motion detector to the MWD BPC motion
detector 1,2,3 or 4.
The lowest four digits of the serial number are displayed
and the currently selected sensor flashes with its LEDs.
L.602
L.702
L.802
L.902
0 ... 1
Deactivation Motion
detector
This parameter can be used to temporarily deactivate
motion detector.
0:
Motion detector inactive
1:
Activated
L.606
L.706
L.806
L.906
0 ... 1
Behaviour in case of
missing device
This parameter is used to set the behaviour when a motion
detector is missing.
0:
Error message if detector is not available
1:
No error messages. Motion detectors will be
taught-in when they are connected.
L.61F
L.71F
L.81F
L.91F
0001 ...
0006
Profile for Motion
detector
This profile sets all associated parameters of motion
detector.
0001: Default values for motion detector 1
0002: Channel 1 all settings, channel 2 deactivated
0003: Channel 1 all, channel 2 deactivated, sensitivity
value=6
0004: Channel 1 persons only (medium), channel 2
vehicles only (medium)
0005: Channel 1 all settings, channel 2 without cross
traffic (medium)
0006: Channel 1 all settings, channel 2 with detecting
slowly moving objects
L.660
L.760
L.860
L.960
Serial number Motion
detector
This Parameter shows the serial number of the Motion
detector.
