EN
Technical description
MWD BPC-H / MWD BPC-HU
FEIG ELECTRONIC GmbH
34/74
MWD_BPC-H-HU_ver4_Manual_rev0_mul
3
Technical description
3.1 Specifications
The MWD BPC-H/-HU Radar Motion Detector operates with a planar microwave antenna and is used on
industrial gates for entry and access recognition.
The device is intended for installation indoors and outdoors and is preset for typical gate applications.
The operation and parameter selection are made via the display of the connected door controller.
The two
channels of the motion detector can be adjusted separately. The approach sensitivity and the direction logic can
be adjusted. The detector can also distinguish between people and vehicles and suppress cross-traffic.
3.2 Technical Data
Table 1: Technical Data
Case dimensions (W x H x D)
135 x 65 x 130 mm [5.315 x 2.559 x 5.118 inch]
Material
Case and retaining bracket: ASA
Cover: PC
Weight with retaining bracket
160 g
Protection class
IP65
Supply voltage
12-27 V AC, 50
– 60 Hz
12-30 V DC, GND must be connected to PE.
SELV, limited capacity power source according to EN 60950-1
Power consumption
typ. 0.8 W
max. 1.2 W
Permissible operating
temperature
-20 °C up to +55 °C [-4 °F up to +131 °F]
Storage temperature
-30 °C up to +75 °C [-22 °F up to +167 °F]
Relative humidity
< 95% non-condensing
Frequency
MWD BPC-H
MWD BPC-HU
24.150
– 24.250 GHz
24.075
– 24.175 GHz
Transmission power
typ. 16 dBm
max. 20 dBm
Maximum mounting height
7 m
Interface
CAN, 125 kBaud
Connection cable
M8-Snap-In-Plug (4-pole)
M8-Snap-In-Socket (4-pole)
