Manual
MWD BP
FEIG ELECTRONIC GmbH
Page 22 of 97
MWD BP_Handbuch_mehrsprachig_8.doc
E N G L I S H
Important!
Read this operating manual prior to connecting, commissioning or operating the
device.
Notes
©
Copyright 2007 by
FEIG ELECTRONIC GmbH
Lange Straße 4
D-35781 Weilburg-Waldhausen
Tel.: +49 6471 3109-0
http://www.feig.de
This manual invalidates all previous versions.
The information in this document can be modified without prior notice.
The transfer or reproduction of this document, as well as the assessment and dissemination of its content
are prohibited unless expressly permitted. Offenders shall be held liable for damages. All patent rights and
utility patent registration rights reserved.
This manual is specifically addressed to the commissioning technicians of the MWD Motion Detector from
FEIG ELECTRONIC GmbH. The commissioning of the motion detector must only be performed by qualified
electricians who are familiar with the safety standards of electrical automation technology.
The supplier of the MWD BP Motion Detector is exclusively responsible for the completeness of the manual.
The information in this document has been compiled according to the best of our knowledge and belief. FEIG
ELECTRONIC GmbH makes no guarantee for the correctness and completeness of the information in this
document. In particular, FEIG ELECTRONIC GmbH cannot be made liable for consequential damages due
to erroneous or incomplete information.
As errors can never be totally avoided despite all efforts, we are always grateful for any information you
could give us.
The installation recommendations made in this document are based on the most favourable conditions FEIG
ELECTRONIC GmbH accepts no guarantee for faultless operation in extraneous environments.
FEIG ELECTRONIC GmbH makes no guarantee that the information contained in this document is not
subject to foreign property rights FEIG ELECTRONIC GmbH does not assign any licences to its own or third-
party patents or other property rights with this document.
Guarantee claims against FEIG ELECTRONIC GmbH can only be made by the direct contracting party and
are not transferable, Any guarantee only applies to the products supplied by FEIG ELECTRONIC GmbH.
Any liability for the complete system is excluded.
The specification of the products, their use, features and performance data do not count as guaranteed
properties and are subject to technical changes.
General information about this document
The following symbols are used in this function description to alert the user to various hazards
and useful tips.
WARNING
alerts to a possible hazard to
persons if the procedure is not performed as
described
.
ATTENTION
alerts to possible damage to the
device.
IMPORTANT alerts to information which is
important to the function of the device.
)
refers to useful information which is useful but
not absolutely necessary for using the device.
