Identification
Manual
ID ISC.MR102
FEIG ELECTRONIC GmbH
Page 117 of 153
H01113-4e-ID-B.docx
8.3.3. Fujitsu (MB89R118)
IC manufacturer identifier: 0x08
Chip ID: 1h = 00000001b (Bit 47 - 40 of UID)
Memory organization: 256 x 8 Byte = 16kBit
Number of blocks
256 (user area: 0
– 249)
Block size
8 byte
Command
Code
Function
Mode
Comment
non-
addressed
addressed
select
0x01
Inventory
-
-
0x02
Stay Quiet
-
-
0x22
Lock Multiple Blocks
WR-OPTION = 0 or 1
0x23
Read Multiple Blocks
*
Security Status is always
0x00
0x24
Write Multiple Blocks
**
WR-OPTION = 0 or 1
0x25
Select
-
-
0x26
Reset to Ready
0x27
Write AFI
WR-OPTION = 0 or 1
0x28
Lock AFI
WR-OPTION = 0 or 1
0x29
Write DSFID
0x2A
Lock DSFID
0x2B
Get System Information
0x2C
Get Multiple Block Security
Status
*
The Custom Specific Commands Read Multiple Blocks Unlimited [0xA3] will be used automatically by the
Reader. In non addressed Mode only one or two blocks can be read and the parameter DB-Blocksize in
“CFG4 Transponder Parameters” should be set to 8.
**
The WR-OPTION will be set automatically by the FEIG Readers if the WR-
OPTION parameter is set to “00:
automatically set” in “CFG4 Transponder Parameters”. Up to two blocks of data can be written for one re-
quest.
10% Modulation and ASK SUB-CARRIER and Datacoding 1 of 4 must be configured in the reader.