FeelElec
FY6200
系列用户手册
37
VCO Sweep Function
Function introduction: The signal output of the external voltage control signal
generator can be realized by external scanning (VCO function). This function can
be realized: voltage control frequency (VCF), voltage control amplitude (VCA),
voltage control bias, voltage control duty cycle function.
Note
：
VCO (Voltage
Control Output)
Operation method: Press the [VCO] button to enter the function interface.
After the scan object, start, cutoff, and scan mode settings are completed, connect
the external scan signal to the [Counter] port on the instrument panel. At this
point, press the OK button to start the VCO scan function. Press OK again, the
scan stops.
Note: The input signal of the external scan (VCO function) needs to be input from
the [Counter] port on the front panel of the signal generator. The input signal
frequency should be within 1000Hz, and the voltage amplitude must be between
0~5V.
