Select Waveform
FY6200 can output Function/Arbitrary Waveform including:
⚫
Sine
⚫
Square
⚫
Triangle/Ramp
⚫
Rise Sawtooth
⚫
Fall Sawtooth
⚫
Lorenz Pulse
⚫
Multitone
⚫
Noise
⚫
Electrocardiogram (ECG)
⚫
Trapezoidal Pulse
⚫
Sinc Pulse
⚫
Narrow Pulse
⚫
Gauss White Noise
⚫
Step Triangle
⚫
Positive Step
⚫
Inverse Step
⚫
Positive Exponent
⚫
Inverse Exponent
⚫
Positive Falling Exponent
⚫
Inverse Falling Exponent
⚫
Positive Logarithm
⚫
Inverse Logarithm
⚫
Positive Falling Logarithm
⚫
Inverse Falling Logarithm
⚫
Linear FM
⚫
AM
⚫
FM
⚫
Positive Half Wave
⚫
Negative Half Wave
⚫
Positive Half Wave
Rectification
⚫
Negative Half Wave
Rectification
⚫
User-defined waveform
Press
WAVE
to change waveform selected. Or rotate ADJ Knob under waveform
switching status to change waveform. The waveform diagram displays on the
screen. Pressing the knob can change to arbitrary waveform directly when
choosing waveform. At start-up Sine is selected by default. (Users can also
configure start-
up waveform. Please check Chapter “Save and Load”.)
Waveform
Sine
Square
Triangle
Sawtooth Arbitrary
Function Name
SINE
SQUR
TRGL
RAMP
ARB
Parameter
Frequency
√
√
√
√
√
Amplitude
√
√
√
√
√
Offset
√
√
√
√
√
Phase
√
√
√
√
√
Duty Cycle
√
Note: the user-defined waveform can be edited and downloaded through the
fy6200 upper computer control software provided by feelelec. Relevant software
and drivers can be downloaded from our website:
