Page 16 of 39
(8)
SSRPF CASE REAR DOORS (OPTION)
INNER DOOR LOWER TRACK
INNER DOOR UPPER TRACK
INNER DOOR CATCH SLOT
2. SWING BOTTOM OUT
OUTSIDE DOOR SET
1. LIFT UP DOOR
TO REMOVE DOOR
INNER DOOR CATCH
OUTER DOOR UPPER TRACK
OUTER DOOR LOWER TRACK
1.
Start with the outer “outside door” and lift the door upward until the bottom edge of door clears the lower track and
then swing the bottom of the door outward and down and out of upper track.
2.
Remove the outer “inside door” using the same procedure.
3.
The inner door set can then be removed using the same procedure starting with the inner “outside door” followed by
the inner “inside door”.
4.
Reverse this procedure for door reinstallation starting with the inner “inside door” followed by the inner “outside
door”. Check that all the doors slide freely.
5.
Replace the outside “inner door” and the outside “outer door”. Be sure to slide the inner door catch into the inner door
catch slot for each left and right side door.
Note: All four rear doors are “not” interchangeable. Each rear door must be replaced in
each doors original location.
