Page 26 of 39
(14)
CLEANING INSTRUCTIONS
14.1
DAILY CLEANING
The case should be cleaned thoroughly, as described in the weekly cleaning section, before it is used for the first time.
NOTICE:
Avoid splashing or soaking any electrical components with water to prevent electrical damage to
the case.
NOTICE:
Shut off lights and power switches and remove all product from case. Allow sufficient time for the
unit to reach room temperature before proceeding with cleaning.
NOTICE:
Remove all product from case before proceeding with cleaning procedure.
NOTICE:
Acrylic front air deflector requires special washing procedures to prevent hazing and yellowing of
material.
NOTICE:
This case is not designed to be cleaned by flushing.
Note: For major spills or foreign material buildup perform the weekly cleaning
instructions.
Note: Detergents are not recommended and do not use abrasive cleaners or pads to
prevent scratching of surfaces.
1.
Clean all foreign materials from the door opening if supplied.
2.
Wipe complete interior of both the upper & lower areas of case using a damp cloth.
3.
The remaining exterior surface should be wiped down using any ammoniated cleaners or soapy warm water.
4.
IMPORTANT: Cleaning the clear acrylic plastic front air deflector require special care to prevent hazing and
yellowing of material. Lightly dust (not wipe) surface with clean soft cloth. Then the surface can be wiped
carefully with a soft, wet cloth or chamois. The cloth or chamois must be kept free of grit by frequently rinsing in
clean water. Grease and oil can be removed with kerosene. Do not use window cleaners or kitchen scouring
compounds. DO NOT use solvents such as Acetone, Benzene, Carbon Tetrachloride, and Lacquer Thinners. A
spray wax such as Pledge or Maguire’s polish can be applied and wiped with a clean soft cloth. The wax tends to
fill in and hide small scratches.
