- 27 -
Joining Cases (No End Glass Between)
1.
If cases are a Counter Top Models, cut holes in counter top as shown in
Cabinet Preparation
section
In this manual.
If cases are a Floor Models, the cases are joined in the same manner but bases will also need to be
joined as described in next section.
2.
Push cases together and align front and rear of cases.
3.
In the holes and slot location shown in above diagram, attach cases together with (4) 1/4-20 screws and
nuts provided. If these are Floor Model cases do not tighten screws until completing
The Joining Floor
Model Base Section
.
4.
Slide the top join strip under the glass trim lip in top rear of case as shown in diagram above.
5.
Attach Join Trim Strip with (2) 8-18 self-drilling screws.
Summary of Contents for ITR Series
