- 50 -
Top LED Light Replacement
1.
Turn power switch and light switch to off position.
2.
Unplug 24v DC power wire from end of existing LED light strip.
3.
Snap existing LED strip out of retaining clips.
4.
Snap the new LED light strip into retainer clips
5.
Reattach the 24v DC power wire into end of the new LED light strip. NOTE: Do not plug cord in
backwards. There are (2) humps on end of cord that must align with humps in end of LED light.
Plugging in the cord upside down will Damage LED light strip.
6.
Turn power switch and light switch to on position.
Shelf LED Light Replacement
1.
Turn power switch and light switch to off position.
2.
Remove Shelf from display case.
3.
Unplug 24v DC power wire from end of existing LED light strip.
4.
Remove the shelf support with light from case.
5.
Use a putty knife between the LED and the shelf support to cut the double-sided adhesive holding
LED light strip to case. Clean as much adhesive off of shelf support as possible.
6.
Attach new LED light strip to shelf support using double sided adhesive.
7.
Reinstall shelf support and shelf into case.
8.
Reattach the 24v DC power wire into end of the new LED light strip. NOTE: Do not plug cord in
backwards. There are (2) humps on end of cord that must align with humps in end of LED light.
Plugging in the cord upside down will Damage LED light strip.
9.
Turn power switch and light switch to on position.
Summary of Contents for ITR Series
