- 24 -
ITR Refrigerated Models Cabinet Mounting
Cabinet Preparation
The ITR models have a large compartment hanging from the bottom of case. On the Self-Contained models
it contains the condenser and condensate evaporator, on the Remotes it contains the condensate pump or
condensate evaporator and fan. This compartment hangs inside the cabinet compartment and the interior of
the cabinet must be open to allow space for this compartment.
Cabinet Cutout
The countertop must be cut to allow the case’s base and condenser compartment to drop into the cabinet
interior. On refrigerated self-contained and remotes with optional condensate pan the Grill cut outs must be
cut in back of cabinet to allow air flow in and out of refrigeration compartment. Use the diagram below for
cutout dimensions.
IMPORTANT:
When placing cases in a line up the number of end panels used will be different. The cut
out and hole placement dimension will need to be adjusted for each particular line up circumstance. See
Continues Line up drawing below.
Continues Line Up Cut Outs
(Note: Dry Cases do not require cut out in counter)
Summary of Contents for ITR Series
