![Federal 90 Series Troubleshooting Manual Download Page 9](http://html1.mh-extra.com/html/federal/90-series/90-series_troubleshooting-manual_3787664009.webp)
CONDITION
Lights Not Working
Check that the light switch is on.
Counter tops
– typically located on the back left bottom of the unit from
customer view.
WDC
– Located inside the lower storage compartment on the right side of
the interior ceiling
If equipped, shelf lights – lamp cord must be fully seated into receptacle,
gently tap them in with a rubber mallet if needed to make full contact. Check
that the lamp cord is plugged into the end of the LED light strip. – Replace
light if necessary.
Check power AC input voltage at LED driver.
Check to DC output voltage at LED driver.
If no output, disconnect output from unit wiring harness and try again as LED
driver will put itself into protect mode if output harness has a short. – Replace
driver if necessary.
LED LIGHTS
SPECIALTY BAKERY / COUNTERTOP
NON-REFRIGERATED BAKERY
WDC & CT
8