16
Informer Wall Mount Series
Operating Instructions
MERGEFORMAT
Configuring
the
Informer-IPFORMAT
General
Description
ations
Operating Instructions
General Information
You must pre-program all the Informer’s functions correctly and test before placing
into service.
The following sections describe the various features and functions of the Informer.
Refer to the
Commander Software Reference Manual
for additional information
about configuration, control and status monitoring of the Informer.
Figure 4 Informer Keypad
Power Supply
Your Informer comes wired with a transformer and a sealed valve regulated
rechargeable six (6) volt battery for units built after May 2015. The battery requires
continuous charge in order to maintain its effectiveness. When the Informer is wired
and receiving power, the Power LED displays a steady green light. In the event that
external power to the Informer is lost, the green Power LED on the unit begins to
flash to indicate the use of battery power.
IMPORTANT
: The Informer should not be turned off; therefore, the unit must remain
connected to the power supply and the battery switch set to ON to avoid depleting the
battery.
Summary of Contents for Informer I-HIOW
Page 29: ......
