2.2.2 Installing the multi-function keypad
After completion of interconnection, follow the next steps to install the multi-function keypad in place. Be sure to
turn off the power of the inverter beforehand.
Installing the multi-function keypad directly on the inverter
Remove the blind cover mounted on the inverter.
Pull the blind cover toward you while holding down the hook (as directed by the arrows in Figure 2.4
below).
Figure 2.4 Removing the Blind Cover
Mount the multi-function keypad onto the inverter.
Put the multi-function keypad in the original slot while engaging its bottom latches with the holes (as shown
below), and push it onto the case of the inverter (arrow
) while holding it downward (against the terminal
block cover) (arrow
).
Figure 2.5 Mounting the Multi-function Keypad
2-3
