ST100 Series Configuration Software
Fluid Components International LLC
19
Parameter Reports
A
Parameter Reports
screen (under
Group Parameters
in the menu tree) displays the calibration and configuration information saved in the ST100
unit for a particular calibration group numbered 1-5. Selecting a parameter report for a particular calibration group displays that group’s info/data.
Similar to other setup menus there is a
Send Changes to Device
button to transmit (to ST100) any parameter change. Use of the
Send
button,
however, is a factory-only operation that requires the Factory level password.
Figure 35 – Example Parameter Report, Group 1
Figure 36 – Example Parameter Report, Group 5
