ST100 Series Configuration Software
4
Fluid Components International LLC
Basic Setup Tab Screens
Select the
Basic Setup
branch on the menu tree to access basic setup items. The
Groups
tab is the first of several tabs across the top of the
screen. Each tab provides a particular menu within the
Basic Setup
branch.
Figure 5 – Example Groups Tab (Basic Setup)
The table below summarizes the tabs within the
Basic Setup
branch.
Table 1 – Basic Setup Tabs
Tab Name
Tab Description
Password Level
Groups
Select and name groups. Switching between established groups
takes place immediately once the radio button is clicked (no pass-
word required).
User
Units
Select flow and temperature units.
User
Pipe Size
Select pipe type and dimensions.
User
Alarms
Select and set alarm requirements.
User
SD Card Logging
Select logging requirements.
User
Totalizer
Select and reset Totalizer requirements.
User
Pressure Offset
Lets users enter a compensating pressure offset value so that the
instrument’s pressure reading matches the reading from an external
trusted reference.
User
[User password 2772]
To verify the current configuration of any setup parameter, click
Get from Device
on any of the Setup menus. After changing any of the setup
parameters, click
Send to Device
. Click
Get from Device
again to verify the parameter(s) change. Observe that the changed parameters are now
displayed. The remaining
Basic Setup
tab screens are shown below.
