manualshive.com logo in svg

Fbt DLM26, User Manual

Share
Download
Fbt DLM26 User Manual Download Page 38

EQ Byp page

  –  from this  sub-menu it is possible  to Bypass or to  make  active  the  5 Bands 

Equalizer placed on the Output Signal Path.

When Bypassed the 5 Bands Equalizer, its current setting will not be lost.

EQ: [x] sub-menu

 – from this sub-menu it is possible to set the Output Channels five available 

Multi-Type Filters.
Anyone of the 5 filters of the Eq can be selected hosing from the list of filter types shown already 

at the “Input Path” section 

[Peaking_Eq, Hi-Shelv_1, Hi-Shelv_2, Hi-Shelv_Q, Lo-Shelv_1, Lo-Shelv_2, Lo-

Shelv_Q,  Low Pass_1,  Low Pass_2,   Low Pass_Q,   High  Pass_1,  High  Pass_2,  High  Pass_Q,  All  Pass_1,  All 

Pass_2, Band Pass, Notch Filt]

More, the DLM26 Is giving the possibility to “Bypass” any single filter of the 5 available in the Equalizer 

section; Once in the editing page of the single filter, a “Byp” field is available for making the single filter  
active or not

Pushing the Enter Button, the above window will allow the access to the “Byp” and “Type” fields.

Using the Param.2 encoder, the selected Filter can be activated or bypassed.

The DLM26 allows the user to select anyone of the filter's type listed above and assign them 
independently using the 5 available filters.

In order to select the filter's type, it is necessary to use the Param.3 encoder, rotate it “clockwise” 
or “counter-clockwise” to select the desired filter.

So, in order to define the filter type for the filter number 1 (“x”=1), it is necessary from the above 
screen, to select the filter, which name will appear on the screen.

If selected a Peaking_Eq filter, then the display will be as follow:

Once selected the desired Filter Type, its parameters can be accessed for editing just pressing 
again the ENTER Button.

Once pressed the ENTER Button, the editing page of the selected filter type will be accessed ONLY 
if the selected filter it is not set in Bypass mode.

Depending from the selected filter, the related parameters will be available for editing 

Out-1          Name            EQ-1
 ->Byp=Off    Type=Peaking_Eq

Out-1          Name          EQ-X
   Byp=Off    Type=Peaking_Eq

Out-1       Name            EQ Byp
 Eq Bypass =  Off

Out-1          Name          EQ-X
 ->Byp=Off    Type=Peaking_Eq

Summary of Contents for DLM26



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands