
−
User Password:
from the “User Password” sub-menu:
Press “ENTER” to access the “
User Password
” page:
Using the Param.2 or Param.3 encoders to choose a character and the NAV/Param.1” encoder
to move between available locations you can enter a
6 Character
Password Name.
The current position of the cursor for the characters to be entered is shown by a “blinking
underscore”.
During this editing phase, the display is as follows if we were using “DLM26X” as the
password:
The DLM26 will exit the “Unit Lock” sub-menu and jump to the “User Password” sub-menu
page screen:
If the password entered in the “Confirm Password” page matches the one entered in the
“Enter Password” page, the following screen will appear.
The Password is now configured and held in the device’s memory.
The user can now decide to “lock” the DLM26 by Password, inhibiting the access to
ALL processor functions depending on the setting of the parameter “Password
Enable/Disable, explained in the following paragraph
Note
: originally the DLM26 is initialized with a default Password which value is “
000000
”,
value that can be anytime reset with a “Factory Reset” (see “Factory Reset” procedure)
User Password
[DLM26X]
Confirm Password
[DLM26X]
SECURITY UTILITY
-- User Password --
User Password
[ ]
SECURITY UTILITY
-- Insert Password --
Summary of Contents for DLM26
Page 66: ......