Section 6 – Installer Functions
6–5
Extra zone zn
Indicates that an additional multiplex zone has been seen on the
multiplex loop that was not defined within the programming
sequence.
Supervisor zn p
Indicates a supervisory failure on a multiplex point. zn = zone
number , p = partition
Sup Restore zn p
Indicates that multiplex points that previously not heard from
have resumed communications with the control panel. ZN = zone
number, p = partition
Abort us zn
Abort condition sent us = user number
Stop on Abort p
Indicates that an abort took place and no transmission took
place. p = partition
Restore on Abor p
Indicates that an abort occurred and a restore signal was
transmitted. p = partition
Comm Failure
Communications failure with CS
Stay Arm us p
Indicates that a STAY arming was performed. us = User, p =
partition
Auto Stay Arm
Indicates that an Auto Stay arm was performed.
Group Bypass us gp
Indicates that a group bypass was performed. us = User code gp
= group number
Group Unbypass us gp
Indicates that a group unbypass was performed. us - User code,
gp = group number
End of Report
Indicates the end of the system log.
Examples Of System Log Displays:
Jul 12 12:18
TROUBLE 02 1
Trouble in zone 2 within partition 1 at 12:18 on July 12. Note: All times are displayed in
military (24 hour) time.
Aug 01 16:15
BYPASS 11 02 1
Bypass performed by user 11 on zone 2 within partition 1 at 16:16 (4:15PM) on August 1.
