Xl-4, XL-4B, and XL-5 Hookup and Installation Instructions
Version 4
5–10
Group Unbypass
Groups can also be unbypassed through the following command:
Group Unbypass Procedure
BYPASS [USER]
✴
2 GP
where:
BYPASS = Bypass Key on keypad
[USER] = User Code
✴
1 =
✴
1 keys
GP = Group number (01 - 24). The group number will be the alarm type (01 - 16) or the
trouble type (17 - 24, for trouble types 1 - 8)
This procedure will remove the bypasses from all of the zones within the partition defined as
part of the group.
For example to remove the bypasses from all zones within group 3 enter:
BYPASS [USER]
✴
2 03
If the quick bypass (# 5 command) has been enabled, then the following keystrokes can be
used:
QUICK GROUP UNBYPASS # 5
✴
2 xx (Where XX is the group number)
User Programming
Users can be programmed through the keypad in addition to the external programming
devices. Keypad programming allows authorized users to change user access codes and
authorization levels.
Note: The initial user authorization levels and partition assignments are initially setup
through the EZ-Mate PC Downloader, LCD Keypad programming, or obtained through the
default values.
Users within the control panel have the following characteristics:
USER NUMBER
The XL-4 system accommodates up to 64 (XL-4) or 128
(XL-5) different user codes. The user number determines
which user is being defined or modified with numbers
ranging from 001 – 064 (XL-4) or 000 – 128 (XL-5).
USER ID
Actual four digit code (0000 - 9999) entered at the keypad
to perform the keypad operations described in this
section. This value is displayed throughout this chapter
as [USER]. USER ID's cannot be duplicated within the
same panel.
AUTHORIZATION LEVEL
Each user of the system is assigned an authorization level
which determines access to various system functions as
described below:
LEVEL 1 -
ARM, DISARM, BYPASS, PROGRAM
USERS, CHANGE PARTITION
ASSIGNMENTS IN ALL PARTITIONS
LEVEL 2 -
ARM, DISARM, BYPASS, PROGRAM
USERS, CHANGE PARTITION
ASSIGNMENTS IN OWN PARTITION
LEVEL 3
ARM, DISARM, BYPASS, PROGRAM
USERS
LEVEL 4
ARM, DISARM, BYPASS
LEVEL 5
ARM, DISARM
LEVEL 6
DURESS CODE
LEVEL 7
ARM ONLY (Maid Code)
