Fayat DYNAPAC DRP45DX, Original Operating Instructions

Page: 80 / 110

Protective equipment: n Working clothes
n Protective gloves
n Safety goggles
1. Park the machine in secured condition
Ä
Chapter 6.4
„Parking the machine in secured condition“ on page 55 .
2. Clean the area around the dipstick and pull the dipstick out.
3. Clean the area around the drain hose.
4. Loosen the hose clamp (1) and route the drain hose to the
outside.
5.
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment
(protective gloves, protective clothing).
– Avoid touching hot components.
Unscrew the drain plug (2) and collect any oil running out.
6. Clean and screw in the drain plug.
7. Assemble the drain hose with the hose clamp.
8. Loosen the screw (1) for approx. five turns and pull the oil
filter (2) out of the housing.
9.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(safety gloves, protective working
clothes, goggles).
Use compressed air to blow the oil filter out from the inside to
the outside.
10. Check the seal ring (2) for damage, change if necessary.
11. Slightly oil the seal rings (1) and (2).
Draining off engine oil
Fig. 72
Cleaning the oil filter
Fig. 73
Fig. 74
Maintenance – Annually / every 250 operating hours
DRP45DX 80