Fayat Group Dynapac CC900G, Instruction Manual

Page: 73 / 104

Maintenance - 20h
4812163901_A.pdf 2019-09-23
Maintenance - 20h
Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified. Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Check that the engine cover is fully open before
carrying out work underneath it. Check that the engine cover is fully open before
carrying out work underneath it.
Engine oil and oil filter - Change
Fig. Engine compartment, left side
1. Drain hose
2. Plug
3. Oil filter
1,
2
3
2
Run the engine until it is warm before draining the oil.
Switch off the engine and push in the
reserve/parking brake knob. Switch off the engine and push in the
reserve/parking brake knob.
Take great care when draining fluids and oils.
Wear protective gloves and goggles. Take great care when draining fluids and oils.
Wear protective gloves and goggles.
Place a receptacle that holds at least 4 liters (1 gal.)
under the drain plug (2).
4
Fig. Engine compartment, right side
4. Filler cap
Undo the oil filler cap (4) and remove the plug (2) from
the end of the drain hose (1); allow all the engine oil to
run out.
Deliver the drained oil to special waste handling. Deliver the drained oil to special waste handling.
Refer to the engine manual for detailed
instructions when changing oil and filters. Refer to the engine manual for detailed
instructions when changing oil and filters.
Remove the oil filter (3) and insert a new one.
Collect any spillage.
65