Fayat Group Dynapac CC900G, Instruction Manual

Page: 46 / 104

Operation
4812163901_A.pdf 2019-09-23
Service brake
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature. When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
1
4
2
3
6
Fig. Control panel
1. Starter switch 2. Speed control
3. Parkering brake
4. Vibration On/Off
6. Forward/Reverse lever
Press the switch (4) to switch off the vibration.
Move the forward/reverse lever (6) to the neutral
position to stop the roller.
Never leave the operator platform without
activating the parking brake (3). Never leave the operator platform without
activating the parking brake (3).
Reserve brake
3
Fig. Controls
3. Parking brake
10. Emergency stop
10
Braking is normally activated using the
forward/reverse lever. The hydrostatic transmission
retards and slows the roller when the lever is moved
towards the neutral position.
A disc brake in each drum motor acts as reserve brake
when in motion and as a parking brake when
stationary.
To brake in an emergency situation, press in the
emergency stop (10), hold the steering wheel
firmly and be prepared for a sudden stop. To brake in an emergency situation, press in the
emergency stop (10), hold the steering wheel
firmly and be prepared for a sudden stop.
After braking, return the forward/reverse lever to the
neutral position and pull out the emergency stop (10).
Activate the parking brake (3) before leaving
the machine. Activate the parking brake (3) before leaving
the machine.
38