Fayat Group Dynapac CC900G, Instruction Manual

Page: 49 / 104

Miscellaneous
4812163901_A.pdf 2019-09-23
Miscellaneous
Locking the articulation
2
1
Fig. Steering joint
1. Locking arm
2. Cotter pin in locked position
Turn the steering wheel to the straight ahead position.
Raise the locking arm (1) and turn 180 degrees
downward. Ensure that the cotter pin (2) is guided into
its lower position correctly for locking the articulation.
Lifting the roller
Weight: refer to the hoisting plate on
the roller
1
Fig. Roller prepared for lifting
1. Hoisting plate
The machine’s gross weight is specified on the
hoisting plate (1). Refer also to the Technical
specifications. The machine’s gross weight is specified on the
hoisting plate (1). Refer also to the Technical
specifications.
Lifting gear such as chains, steel wires, straps,
and lifting hooks must be dimensioned and used
in accordance with the applicable safety
regulations for lifting devices. Lifting gear such as chains, steel wires, straps,
and lifting hooks must be dimensioned and used
in accordance with the applicable safety
regulations for lifting devices.
Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured. Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured.
2
1
Fig. Articulated joint
1. Locking arm
2. Cotter pin in open position
Unlocking the articulation
Remember to unlock the articulation before
operating. Remember to unlock the articulation before
operating.
Raise the locking arm (1) and turn it 180 degrees
upward. Check that the cotter pin (2) is guided
correctly into position for unlocking the articulation.
41