Fayat Group Dynapac CC900G, Instruction Manual

Page: 69 / 104

Maintenance, 10h
4812163901_A.pdf 2019-09-23
Maintenance, 10h
Every 10 hours of operation (Daily)
Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified. Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Engine - Checking the oil level
Fig. Engine
1. Dipstick
2. Filler plug
1
2
Ensure that the engine cover is fully open when
work is carried out under the cover. Ensure that the engine cover is fully open when
work is carried out under the cover.
Open the engine cover lock and lower the engine
cover forwards.
Check the oil level using the dipstick (1). The level
should be between the marks. If the level is near the
lower mark, top off with fresh engine oil via the filler
cap (2). See under the heading lubricants for the
correct oil grade.
Never overfill with oil, as this can
damage the engine. Never overfill with oil, as this can
damage the engine.
Hydraulic reservoir, Level check - Filling
Fig. Hydraulic reservoir
1. Sight glass
2. Filler hose
1
2
Wipe the sight glass (1) clean. Make sure that the oil
level is in the middle of the sight glass. If necessary,
top up with fresh hydraulic fluid through the filler hose
(2).
See under the heading ‘Lubricants’ for the correct fluid
grade.
61