Fayat Group DYNAPAC CC234C, Instruction Manual

Page: 54 / 174

Machine description
4812159901_D.pdf 2023-01-25
Forward & Reverse lever
Fig. Forward & Reverse lever
1 2
3
4
5
6
1 Vibration on/off 5 * Edge cutter, Up 1 Vibration on/off 5 * Edge cutter, Up
2 Panic sprinkler (ON as long as
button depressed) 6
*
Edge cutter, Down 2 Panic sprinkler (ON as long as
button depressed) 6
*
Edge cutter, Down
3
*
Offset left 3
*
Offset left
4 * Offset right 4 * Offset right
* Optional * Optional
Function descriptions
No Designation Symbol Function No Designation Symbol Function
1 Vibration on/off First push will start vibrations, second push will stop
vibrations. 1 Vibration on/off First push will start vibrations, second push will stop
vibrations.
2 Panic sprinkling Panic sprinkling of both drums. Push the button to get full flow
on sprinkler pump. 2 Panic sprinkling Panic sprinkling of both drums. Push the button to get full flow
on sprinkler pump.
3, 4 Offset left/right The left button moves the rear drum to the left, the right button
to the right.
Always stop in neutral and to switch to the other side press
once again. Steady light in working mode. (flashes in offset) 3, 4 Offset left/right The left button moves the rear drum to the left, the right button
to the right.
Always stop in neutral and to switch to the other side press
once again. Steady light in working mode. (flashes in offset)
5, 6 Edge press/cutter, UP/DOWN The edge cutter can be moved up and down when the
machine is in the operating position. The edge cutter can only
be moved up when the machine is in transport position. 5, 6 Edge press/cutter, UP/DOWN The edge cutter can be moved up and down when the
machine is in the operating position. The edge cutter can only
be moved up when the machine is in transport position.
Display explanations
Fig. Start screen
When the ignition key is activated to position I, a start
screen is visible in display. This is shown for a few
seconds and then switches over to the status screen.
42