Fayat Group DYNAPAC CC234C, Instruction Manual

Page: 166 / 174

Maintenance - 2000h
4812159901_D.pdf 2023-01-25
Wheel gear - Checking the oil level/Filling the
oil
Fig. Oil level check - wheel gear
1. Level plug
2. Filling plug
1
2
Place the roller on a level surface. Move the machine
until the inspection/filling holes are in position for filling.
1 Fig. Wheel gear
2
Refill with new oil, about 0.8 l (0.85 qts). Use
transmission oil according to the lubricant specification.
Ensure that the oil level reaches up to the lower edge
of the plug hole.
Clean and refit the plugs.
Rubber elements and attachment screws
Check
Fig. Drum, vibration side
1. Rubber element
2. Attachment screws
2
1
Check all rubber elements (1). Replace all elements if
25% or more than 25% of the number on one side of
the drum have cracks deeper than 10-15 mm (0.4-0.6
in).
Check using a knife blade or pointed object.
Check also that the attachment screws (2) are
tightened.
154