Fayat Group DYNAPAC CC234C, Instruction Manual

Page: 87 / 174

Operation
4812159901_D.pdf 2023-01-25
Burnout of DPF-filter (Regeneration) - (stage V)
The machine is equipped with a diesel particle filter
(DPF filter), and the engine performs an automatic
burnout of soot and ash if necessary.
The burnout is performed after 6-10 hours of
operation, depending on the operating mode.
3, 4
Fig. Control panel
1. Lamp
3. High exhaust temperature
4. Delayed burnout
1
4 3
When burnout starts, the yellow warning indication (1)
lights continuously and then goes out after 2 min.
The burnout of the DPF filter lasts for approx. 30
minutes, and the machine can be operated as normal
or be allowed to idle during this time.
An image indicating high exhaust temperature (3) is
displayed when burnout starts (pop-up), and goes out
after 10 seconds. An indication (3) in the display's
status field is shown throughout the period when the
engine is performing burnout.
If it is not appropriate to allow the machine to perform
automatic burnout, perhaps because the machine is in
an unsuitable location or the prevailing working
conditions do not permit this, it is possible to delay
burnout by activating delayed burnout.
Selection for delaying burnout is in the menu "Machine
settings - EAT cleaning" on the display and delays
filter burnout for 20 minutes.
An image indicating delayed burnout (4) is now
instead shown in the display picture.
DPF displays
Display symbol Sound Soot
level Comment "Yellow
warning" Display symbol Sound Soot
level Comment "Yellow
warning"
Beep <100% Delayed burnout selected, to delay burnout by
20 min.
Deactivated automatically when the machine
is restarted.
-
Beep <100% Delayed burnout selected, to delay burnout by
20 min.
Deactivated automatically when the machine
is restarted.
-
100% -
<114% 0.5Hz 100% -
<114% 0.5Hz
>100% This view appears after an active selection in
the display screen. >100% This view appears after an active selection in
the display screen.
75