Fayat Group DYNAPAC CC224C, Instruction Manual

Page: 93 / 168

Miscellaneous
4812159701_D.pdf 2021-03-16
Miscellaneous
Lifting
Locking the articulation
1
2
3
4
Fig. Articulation in the locked position
1. Locking pin
2. Locking dowel
3. Locking arm
4. Locking lug
Articulation must be locked to prevent inadvertent
turning before lifting the roller. Articulation must be locked to prevent inadvertent
turning before lifting the roller.
Turn the steering wheel to the straight ahead position.
Push in the emergency/parking brake knob.
Pull out the lowermost locking pin (1), which has a a
wire attached. Pull up the locking dowel (2) which also
has a wire attached.
Fold out the locking arm (3) and secure it to the upper
locking lug (4) on the articulated link.
Fit the locking dowel into the holes through the locking
arm and locking lug. Lock the dowel in position with
the locking pin (1).
Locking the articulation
1
2
Fig. Steering joint lock, locked
1. Lock handle
2. Locking dowel
Articulation must be locked to prevent inadvertent
turning before lifting the roller. Articulation must be locked to prevent inadvertent
turning before lifting the roller.
Turn the steering wheel to the straight ahead position.
Activate the parking brake.
Front frame shall be in line with the rear frame.
Lift lock in the handle (1) while it is turned clockwise.
Make sure dowel (2) gets in position as illustrated.
Arm must be in contact with the surface of the molded
holder.
If this is not done, it's likely that the machine halves
are out of line, steer then the machine so this is
happening.
81