Fayat Group DYNAPAC CC224C, Instruction Manual

Page: 66 / 168

Machine description
4812159701_D.pdf 2021-03-16
Electrical system (version 1)
3
Fig. Main electrical central
1. Control unit (ECU)
2. Fuses
3. Main relay
1
2
The machine's main switchbox (1) is located on the
rear of the operator platform. There is a plastic cover
over the distribution box and fuses.
On the plastic cover there is a 24V socket.
Fuse boxes in main switchbox
Fig. Fuse box
The figure shows the position of the fuses.
The table below gives fuse amperage and function. All
fuses are flat pin fuses, type C (medium).
Fuse box (F1) Fuse box (F1)
1.
Main relay (F1.1) 5A
5.
Power group 3, Main ECU (F1.5) 20A
1.
Main relay (F1.1) 5A
5.
Power group 3, Main ECU (F1.5) 20A
2. Supply, Main ECU, I/O unit, Display
(F1.2) 5A 6. Power group 4, Main ECU (F1.6) 20A 2. Supply, Main ECU, I/O unit, Display
(F1.2) 5A 6. Power group 4, Main ECU (F1.6) 20A
3. Power group 1, Main ECU (F1.3) 10A 7. 24V outlet, Lighting for tachograph (F1.7) 10A 3. Power group 1, Main ECU (F1.3) 10A 7. 24V outlet, Lighting for tachograph (F1.7) 10A
4.
Power group 2, Main ECU (F1.4) 10A
8.
Accessory ECU (F1.8) 20A
4.
Power group 2, Main ECU (F1.4) 10A
8.
Accessory ECU (F1.8) 20A
Fuse box (F2) Fuse box (F2)
1. 5. 1. 5.
2. DCA Asphalt (F2.2) 10A 6. Process lightning (F2.6) 15A 2. DCA Asphalt (F2.2) 10A 6. Process lightning (F2.6) 15A
3. 7.
Driving lights (turn signals) (F2.7) 7.5A
3. 7.
Driving lights (turn signals) (F2.7) 7.5A
4. 8. Driving lights (main.) (F2.8) 10A 4. 8. Driving lights (main.) (F2.8) 10A
54