Fayat Group DYNAPAC CC224C, Instruction Manual

Page: 122 / 168

Maintenance, 10h
4812159701_D.pdf 2021-03-16
Wheel scrapers
Control - Adjustment
1
1-2 mm
Fig. Wheel scrapers
1. Scraper blades
2. Locking hook
3. Adjusting screw
3
2
Make sure that the scrapers are undamaged. Adjust
the scrapers so that they are 1-2 mm from the tires.
For special asphalt compounds it can be better if the
scraper blades (1) are only in light contact with the
tires. The contact is adjusted with the screw on the
back of the scraper bracket.
2
Fig. Wheel scrapers
1. Scraper blades
2. Locking hook
1
The scrapers must hang free from the tires during
transportation.
Lift up the scraper blades (1) and make sure that they
are locked in raised position by the looking hooks.
To lower down the scrapers, lift the scraper slightly
while pressing in the locking hook.
110