Fayat Group DYNAPAC CA1500, Instruction Manual, Page: 77 / 168

Operation
4812159201_F.pdf 2019-10-21
Fig. The display shows the selection in
the middle (tortoise, drum spin, wheelspin
or hare).
The machine's gear position is shown in the center of
the speedometer; select the gear/speed for the task.
The machine does not need to be stopped to change
gear position.
Max. speed Max. speed
= Rabbit (4) 12 km/h 7.5 mph = Rabbit (4) 12 km/h 7.5 mph
= Drum spin (2) 9 km/h 5.6 mph = Drum spin (2) 9 km/h 5.6 mph
= Wheel spin (3) 8 km/h 5 mph = Wheel spin (3) 8 km/h 5 mph
= Turtoise (1) 7 km/h 4.5 mph = Turtoise (1) 7 km/h 4.5 mph
Example is TC - Limited Slip Rear Axle (for other alternatives see
table in section for Technical data)
Carefully move the forward/reverse lever (2) forwards
or backwards, depending on which direction of travel
is required.
The speed increases as the lever is moved away from
the neutral position.
2
1
Fig. Control panel
1. Potentiometer (speed limiter)
2. Forward/Reverse lever
Machine with speed limiter (speed potentiometer) -
Optional.
Set the potentiometer (1) for variable speed setting in
the required mode.
The machine's gear position is shown in the center of
the speedometer. Select the gear/speed for the task.
65