Fayat Group DYNAPAC CA1500, Instruction Manual, Page: 158 / 168

Maintenance - 2000h
4812159201_F.pdf 2019-10-21
Drum - Checking the oil level
Fig. Left drum side
1. Groove
1
Position the roller on a flat surface with the groove (1)
on the inside of the drum aligned with the top of the
drum frame.
Drum - Oil change
Fig. Drum, right side
1. Filler plug
2. Level glass
3. Drain plug
1
2
3
Ensure that the drum's plugs and level glass are
positioned as in Fig 2.
Place a vessel capable of holding at least 20 liters (5.3
gal) under drain plug (3).
Remove and clean filler plug (1) and drain plug (3).
Allow all the oil to drain out. Clean and refit drain plug
(3) and fill with new oil according to the lubricant
specification. The total volume of oil in the drum must
be 15 liters (4.0 gal).
Deliver the drain oil to environmentally correct
handling. Deliver the drain oil to environmentally correct
handling.
Make sure to only use Dynapac Gear oil 200 in
the drum. Make sure to only use Dynapac Gear oil 200 in
the drum.
Clean and refit filler plug (1).
146