Fayat Group DYNAPAC CA1500, Instruction Manual, Page: 49 / 168

Machine description
4812159201_F.pdf 2019-10-21
Warning indication - membrane panel (Keypad)
"Yellow" - Warning "Yellow" - Warning
- The engine has an alarm in category yellow (Alarm image shown in the display) - The engine has an alarm in category yellow (Alarm image shown in the display)
- Communication with the display is interrupted - Communication with the display is interrupted
- The fuel level is below <10% - The fuel level is below <10%
- Charging absent - Charging absent
"Red" - Warning Flashes red continuously "Red" - Warning Flashes red continuously
- The engine has an alarm in category red (Alarm code shown in the display) - The engine has an alarm in category red (Alarm code shown in the display)
- Communication with the engine is interrupted - Communication with the engine is interrupted
- The engine temperature is too high - The engine temperature is too high
- Low oil pressure in the engine - Low oil pressure in the engine
- The air filter is clogged - The air filter is clogged
- The hydraulic fluid temperature is too high - The hydraulic fluid temperature is too high
- The hydraulic fluid filter is clogged - The hydraulic fluid filter is clogged
Display explanations
Fig. Start screen
When the ignition key is activated to position I, a start
screen is visible in display. This is shown for a few
seconds and then switches over to the status screen.
Before activating the starter motor, wait until the start
image has changed to the status image (the machine
is performing a system check while the start image is
being displayed).
Fig. Status screen
The status image provides information on the fuel
level, machine hours and voltage level. The fuel level
is indicated as a percentage (%).
This screen is active until the Diesel engine is started
or an active screen choice is made via the function
buttons below the display.
37