Fayat Group DYNAPAC CA1300 D, Instruction Manual, Page: 72 / 284

Operation
4812165001.pdf 2023-05-26
Working lights - Adjustment
Use a ladder for easier access
to adjust the working lights.
Rear view mirrors - Adjustment
1
Fig. Rear view mirrors
Rear view mirrors can be adjusted from the ground, on
machines equipped with ROPS.
Use a step ladder if adjusting rear view mirrors on a
machine equipped with a cabin.
The arm of the rear-view mirror has a stop in the
maximum extended position. The mirror may then be
adjusted for a good rear view.
The visibility requirement is fulfilled as per standard
ISO 14401.
All rear view mirrors must be clean and adjusted for
good backward visibility.
Cab windows - de-icing
To de-ice the cab windows, stand steadily
on the cab step.
Use a telescopic ice scraper and de-ice the windows
as far as you can reach.
Adjust the seat to the left position for the best view
through the de-iced section of the window.
Turn on the defroster fully, and the remaining part of
the windows will be de-iced within a few minutes.
Wiper blade - Replacement
Ensure that the wiper blades are in good condition.
Replace the blades when they no longer wipe the cab
windows clean.
Use a ladder for easier access for
wiper blade replacement.
54