Fayat Group DYNAPAC CA1300 D, Instruction Manual, Page: 53 / 284

Machine description
4812165001.pdf 2023-05-26
Function description
No Designation Symbol Function No Designation Symbol Function
1. Working lights, switch When depressed, the working lights are on 1. Working lights, switch When depressed, the working lights are on
2. Driving lights (Low beam),
switch When pressed in the upper position,, the low-beam
headlights are switched on. Parking lights are
switched on when pressed in the lower position. 2. Driving lights (Low beam),
switch When pressed in the upper position,, the low-beam
headlights are switched on. Parking lights are
switched on when pressed in the lower position.
3. Hazard warning lights,
switch Where depressed, the hazard warning lights are on 3. Hazard warning lights,
switch Where depressed, the hazard warning lights are on
4. Water separator Yellow control lamp. If the lamp is lit, this indicates
that there is water in the tank.
Stop the roller and drain the fuel filter. (see chapter
“Maintenance procedures 50h”) 4. Water separator Yellow control lamp. If the lamp is lit, this indicates
that there is water in the tank.
Stop the roller and drain the fuel filter. (see chapter
“Maintenance procedures 50h”)
5. Regeneration parked Yellow indicator lamp. If the lamp comes on, a
parked regen (regeneration) must be started. 5. Regeneration parked Yellow indicator lamp. If the lamp comes on, a
parked regen (regeneration) must be started.
6. Control panel 6. Control panel
7. Engine diagnostics control
light, serious fault Red control lamp. Serious fault: Switch off engine
immediately!
Error codes are displayed alternating with the
hourmeter on the control panel. Rectify before
restarting.
7. Engine diagnostics control
light, serious fault Red control lamp. Serious fault: Switch off engine
immediately!
Error codes are displayed alternating with the
hourmeter on the control panel. Rectify before
restarting.
8. Engine diagnostics control
light, less serious fault Yellow indicator lamp. Less serious fault: Rectify
as soon as possible.
Error codes alternating with the hourmeter are
displayed on the control panel 8. Engine diagnostics control
light, less serious fault Yellow indicator lamp. Less serious fault: Rectify
as soon as possible.
Error codes alternating with the hourmeter are
displayed on the control panel
9. HEST regeneration in
progress, indicator lamp Yellow indicator lamp. Regeneration in progress
and exhaust gas temperature is raised as a result.
Leave the machine running until the lamp goes out. 9. HEST regeneration in
progress, indicator lamp Yellow indicator lamp. Regeneration in progress
and exhaust gas temperature is raised as a result.
Leave the machine running until the lamp goes out.
10. Engine tamper indicator lamp Indicator lamp The lamp comes on if the operator
has tampered with the engine, or if there is a fault
in the engine as a result of which it no longer
complies with the emission requirements. 10. Engine tamper indicator lamp Indicator lamp The lamp comes on if the operator
has tampered with the engine, or if there is a fault
in the engine as a result of which it no longer
complies with the emission requirements.
10. Regeneration parked, Switch Parked regen is activated when pressed. Parked
regen (regeneration) can be started when the
indicator on the switch flashes on and off. 10. Regeneration parked, Switch Parked regen is activated when pressed. Parked
regen (regeneration) can be started when the
indicator on the switch flashes on and off.
35