Fayat Group DYNAPAC CA1300 D, Instruction Manual, Page: 55 / 284

Machine description
4812165001.pdf 2023-05-26
No Designation Symbol Function No Designation Symbol Function
25. Warning lamp,
battery charging If the lamp lights while the engine is running the
alternator is not charging. Stop the engine and
locate the fault. 25. Warning lamp,
battery charging If the lamp lights while the engine is running the
alternator is not charging. Stop the engine and
locate the fault.
At a voltage below 12.5 volts, the engine revs will
automatically be set to 1300 revs to ensure
sufficient charging of the battery. This only applies
when the parking brake is activated. At a voltage below 12.5 volts, the engine revs will
automatically be set to 1300 revs to ensure
sufficient charging of the battery. This only applies
when the parking brake is activated.
26. Fuse box (on control column) Contains fuses for the electrical system.
See under the heading ‘Electrical system’ for a
description of fuse functions. 26. Fuse box (on control column) Contains fuses for the electrical system.
See under the heading ‘Electrical system’ for a
description of fuse functions.
27. Instrument cover
(For machine equipped
with ROPS only) Lowered over the instrument plate to protect the
instruments from the weather and sabotage.
Lockable 27. Instrument cover
(For machine equipped
with ROPS only) Lowered over the instrument plate to protect the
instruments from the weather and sabotage.
Lockable
28. Emergency stop When pressed, the emergency stop is activated.
Brakes the roller and switches off the engine.
The power supply goes off.
N.B. When starting the machine,
the emergency stop must be inactive.
28. Emergency stop When pressed, the emergency stop is activated.
Brakes the roller and switches off the engine.
The power supply goes off.
N.B. When starting the machine,
the emergency stop must be inactive.
29. Starter switch Positions 1-2: Shut off position,
key can be removed. 29. Starter switch Positions 1-2: Shut off position,
key can be removed.
Position 3a: All instruments and electric
controls are supplied with power. Position 3a: All instruments and electric
controls are supplied with power.
Position 3b: Glowing. Hold the starter switch in this
position until the lamp goes out. The starter motor
is activated in the next position. Position 3b: Glowing. Hold the starter switch in this
position until the lamp goes out. The starter motor
is activated in the next position.
Position 3c: Starter motor activation. Position 3c: Starter motor activation.
30. Seat switch Remain seated at all times when operating the
roller. If the operator stands up during operation,
a buzzer sounds. After 3 seconds the brakes are
activated and the engine stops. 30. Seat switch Remain seated at all times when operating the
roller. If the operator stands up during operation,
a buzzer sounds. After 3 seconds the brakes are
activated and the engine stops.
32. Forward/Reverse lever The lever must be in neutral to start the diesel
engine. The engine cannot be started if the lever is
in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is
moved forward, the roller moves forward etc.
The roller's speed is proportional to the distance
the lever is from the neutral position. The further
the lever is from the neutral position, the higher the
speed. 32. Forward/Reverse lever The lever must be in neutral to start the diesel
engine. The engine cannot be started if the lever is
in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is
moved forward, the roller moves forward etc.
The roller's speed is proportional to the distance
the lever is from the neutral position. The further
the lever is from the neutral position, the higher the
speed.
34. Handbook compartment Pull up and open the top of the compartment for
access to handbooks. 34. Handbook compartment Pull up and open the top of the compartment for
access to handbooks.
37